Gypsum Block Production Line

gypsum board production line processes:Measuring mixing the material, roof, catch plates, Groove scraper, hydraulic loading tra

Gypsum block production line developed by the advanced experience of the introduction of the global gypsum block equipment, annual output of 400,000 square meters, we have finally achieved a perfect and mature gypsum block production line. At present, ourproduction line has seven patent technology: material storage systems, automatic batching system, mixing and molding systems, and space clamp system, and so on.

1. Product specification

   1) Length: 666mm

   2) Width: 500mm

   3) Thickness: 80mm, 100mm, 120mm, 150mm, 180mm, 200mm

2. Annual capacity:

   100,000 m2 - 500,000m2

3. Production process:

   Metering and weighing section—The building gypsum is conveyed to weighing silo by screw conveyor, when the materials in weighing silo are up to the set value, the screw conveyor will stop conveying.(Automatic feeding)

   Forming section—The metered building gypsum is evenly conveyed to a mixer by a flash screw conveyor and the water is conveyed to the mixer by pneumatic valves. The evenly mixed slurry by the mixer will be poured into forming machine, the hydraulic scraper will scrape out the upper surface tongue-and-groove, then hydraulic jacking out the formed gypsum blocks,grasping plate system will block to catch the car batteries, pulled dry site, the site robot palletizing. At least palletizing four, to save you at least three-quarters of the floor space.

   4. Final product variety:  

   Hollow gypsum block

   Solid gypsum block

5. Physical property:

   1) average density: 800-1,100kg/m3±5(under dry conditions)

   2) humidity 6% of maximum residual moisture

   3) breaking resistance strength:

Thickness under Average Density		Average Load
	80mm		2.7KN
	100mm		4.0KN

   4) bending strength: minimum 2.5KN/m2(maximum bending moment: >=550Nm)

   5) hardness: minimum 5MN/m2

   6) wire-resistance: European A1 Standard

   7) heat insulation: the heat insulation effect of gypsum block of 1mm thickness equals to brick of 3cm or cement of 4cm or concrete of 5cm.

   8) the coefficient of gypsum heat conduction:0.34W/m.K

7. Advantages:

   1) Product quality: product quality is priority to the international standard JC/T698-1998 (equal to European Standard).

   2) With a strong design team as the basis, we can supply equipments and production line with different configuration which are tailored to customers’ requirements. We guarantee whole-life service for our equipments.

   3) We can offer a basket of services of design, producing, installation, commissioning and training, as well as turnkey project for customers.

8 Services

to confinements party first visited the equipment manufacturing plant, production line equipment, the user units and block the installation site.

free plant design, equipment, supervision of installation.

gratis personnel technical training, and wall installation construction supporting the process and the supporting material formula one-stop turnkey projects.

equipment commissioning is completed qualified within one year warranty and lifetime maintenance.

 

Gypsum Block Production Line